Dishwasher filter: twist it out of the bottom, wash it with soap and a soft brush
Food left on plates or water standing in the base usually starts here. Every few months is enough.

The filter at the bottom of a dishwasher catches food scraps so they don’t end up back on clean plates or block the pump and drain. Neglect it and the dishes come out less clean, and water can start pooling in the base.
How often
Bosch recommends cleaning it every few months, and checking the spray arms at the same time.
Step by step
- With the dishwasher empty, pull out the lower rack.
- Lift off the lower spray arm if it is in the way.
- Twist the filter and pull it up together with the mesh screen around it.
- Wash it under running water with mild soap and a soft brush until the debris is gone.
- Put the filter back, then the spray arm, then the rack.
How the filter comes out varies by model, so your owner’s manual is the first reference.
Spray arms
Run each arm under the tap to see whether any holes are blocked. A toothpick is enough to loosen what’s stuck.
If water stays in the bottom
The pump may be clogged. Bosch’s advice: clean the filter first, then remove the pump cover underneath it and carefully clear debris and standing water with a sponge.
Photo: an open dishwasher with pans and plates, rim lettering blurred. By Piotrus, CC BY-SA 3.0, via Wikimedia Commons.
Source: Bosch Home Appliances support pages on cleaning the dishwasher filter and dishwasher maintenance, read on 19 November 2026.
Kuwait One, once a week.
The most useful stories we published this week, in your inbox.
No spam. Unsubscribe anytime.



